If you are using a wired connection on your PC or using a USB connection with your 3G or 4G LTE dongle, you can share this connection to other devices. This means you can connect other smartphones, tablets and even laptops to this connection by creating aportable wireless hotspot on Windows 10. There is no direct UI to create the hotspot, but you can easily do it using few commands.

In this article, we will show you how to get started in creating a wireless hotspot in Windows 10.

To get started, right click on the Windows start button and click Command prompt (admin). This will open the command prompt in administrator mode.

Now type the following command;

netsh wlan set hostednetwork mode=allow ssid=AdHoc key=password

In the above command, you can add your own value for SSID and enter your key. Now press enter.

Now to start the network, type the below command;

netsh wlan start hostednetwork

Now that ad-hoc connection is created with passkey, you need to share the existing connection.

Once the hosted network is enabled, you can see MyWiFi connection listed in the network and sharing center. Now the network needs an internet connection and for this, you need to share the existing active Internet connection. Right click on your existing internet connection and select properties.

Now select the Sharing tab in properties. Check the box against “Allow other network users to connect through this computer’s internet connection”. Then select the newly created Wi-fi connection from the drop down list. Now save the details and close the properties.

Now you can see Internet available on the new hotspot connection created.

In case you want to stop the hosted network, use this command;

netsh wlan stop hostednetwork

If you find this method difficult, you can probably use tools like Virtual Hotspot,Connectify or mHotspot.

Ref: http://www.nirmaltv.com/2015/08/18/how-to-create-a-wi-fi-hotspot-in-windows-10/

有时候去到宾馆、酒店,发现只有有线的网络连接。虽然带了笔记本,但是还有一大堆什么iPad、iPhone、Android需要上网。怎么办呢?

哈哈,简单!在电脑上装一个叫做Virtual Wifi Hotspot的软件。这个软件是全免费的。而且不需要安装。

打开以后再界面上输入热点名称(SSID),选择加密方式以及密码。然后点击开始共享的按钮就可以让你的那一堆无线设备上网了。

网址如下:

http://virtualwifihotspot.codeplex.com

 

如果这个工作不稳定啊等等的话,还可以试试下列软件:

FlyFi Transparent

Virtual Router

Maryfi

WIFI共享经理

APWIFI

 

通常Wifi密码都是保存在手机上,但是每当一刷机,所有Wifi密码都必须重设。

有什么办法可以保存手机上的Wifi密码么?

1. root

2. 用re进入data/misc/wifi,里面有个bcm_supp.conf或者其他文件名*.conf的文件,所有记住的wifi密码都在这里.

 

  如果您的Windows 7系统有外部网络连接,并且还有规定的Wi-Fi设备的话,用一段简单的命令就可以让它变成Wi-Fi基站了。

  这一功能看起来已经被隐藏,并且还没有开发完成,估计是因为设备和驱动的兼容性没有解决,不过我们可以测试一下看看:

  用管理员模式启动命令行提示符,然后输入

  netsh wlan set hostednetwork mode=allow ssid=Hotspot key=passwordhere

  用以下命令启动基站功能

  netsh wlan start hostednetwork

  运行完命令以后,您可以在网络和共享设置里面看到一个“Microsoft Virtual WiFi Miniport Adapter”设备。

  在共享选项卡里设置共享即可完成,之后,您就可以用无线设备来访问这台机器,目前的功能似乎并不强大。

    目前支持的设备有:
    Atheros AR5005GS (as in the TP-Link TL-WN651G)
    Atheros AR5007EG with 8.0.0.238 firmware
    Broadcom 4310-series (in many Dell laptops)
    D-link AirPlus G DWL-G510 Wireless PCI Adapter (driver version 3.0.1.0)
    Intel 5100/5300 (with latest drivers from Intel‘s site, version 13.0.0.107, 64bit systems only)
    Ralink RT2870 (in many 802.11n USB dongles)
    Realtek RTL8187SE (with the drivers that came with windows7)
    Realtek RTL8192u with 1370(Beta)